Comments on: Jailbreak/Activate IPSF 1.1.3 iPhone with 04.03.13_G

By: Mithoz

Mithoz — Thu, 31 Jan 2008 04:29:52 +0000

Hi there,
im having problem restoring my otb iphone from 1.1.3 to either 1.1.2.or 1.1.1. after i SHIFT Click restore, the error is : “The iPhone “iPhone” could not be restored. An unknown error occurred (1).” the firmware version is 04.03.13_G. is there a way to solve this so that the iphone can be activated even no unlock yet available? thanks and hope to hear from you very soon.

By: Matt

Matt — Thu, 31 Jan 2008 01:25:20 +0000

Will this solution work if Nate’s upgrade is replaced with the Dev upgrade?

By: dart

dart — Wed, 30 Jan 2008 09:23:20 +0000

IPSF solution worked only on BL 3.9

By: Patrick

Patrick — Wed, 30 Jan 2008 01:19:00 +0000

How do you know which bootloader version you have? I’m currently at 1.1.1 with IPSF.

By: Israel

Israel — Tue, 29 Jan 2008 14:15:48 +0000

hi i made the same but i cant get the phone signal any idiea

By: dart

dart — Tue, 29 Jan 2008 10:24:18 +0000

Hi,

I tried both methods (DEV, NATE)
Sounds problem solved after i used the dev softupdate and installed the ringtone fix from the installer.
after nate there was no sound at all (keypad and ringtones)
after DEV TEAM (sound was low, but the fix solved it)

ALL WORKS NOW (i think :) )

By: arse

arse — Tue, 29 Jan 2008 01:38:12 +0000

jawknee on January 27th, 2008:

Sound can sometimes disappear when you do the emergency call > *3007*# trick (or whatever the combination is) to get into the phone – when you reject that call the phone thinks your still connected to a call and routes the sound to the earpiece, rather than the speaker. I don’t know if this is the cause in your case, but try making a call and see if that fixes it, or turn the phone off and on again.

By: leny

leny — Tue, 29 Jan 2008 01:07:24 +0000

Great ! Works for me…. IPSF was a good choise !

By: JT

JT — Mon, 28 Jan 2008 11:29:22 +0000

Hmmm…upgraded to 1.1.3 with the new baseband like described above… Installed Signal.app with the Terminal (via the scp command)…, chmodded signal.sh and igsm… But it doesn’t work… Signal keeps crashing on me…
:-(
Help? Plz…

By: jawknee

jawknee — Sun, 27 Jan 2008 20:40:37 +0000

hey
just wondering if you encountered the no sound issue in your quest… i’ve got my signal back etc, but am a little worried that i cant hear anything.

By: Deep

Deep — Sun, 27 Jan 2008 18:09:05 +0000

JH i read on the other forum, that you should reset your all your settings, and it will start to save password again. I didnt try it myself, but just a suggestion.

By: vlens

vlens — Sun, 27 Jan 2008 17:54:56 +0000

-> “…No need to patch files like in 1.1.2 to be able to access the SMS and Phone application for non-carrier countries.”

How can I change the APN / EDGE Settings when using various international Sim-Cards?

By: JH

JH — Sun, 27 Jan 2008 13:36:33 +0000

Wow, nice instructions. I used them and everything worked. Thanks so much.

I have an issue with the iPhone not saving passwords for wifi and email account. Any suggestions :-)

Cheers

By: FCA

FCA — Sun, 27 Jan 2008 10:41:58 +0000

that rocks man!! it’s a very complete guide! Can I bother you if I have some issue in the process? thanks!

By: Matthew Freeman

Matthew Freeman — Sat, 26 Jan 2008 20:07:16 +0000

Anyway of running signal.app on system startup?