New Holux M-241 firmware 1.11

Holux recently published a firmware update for its M-241 GPS logger. Once applied you’ll be able to set the M-241 on auto-logging so it starts logging automatically every time you turn it on. In earlier firmware releases you had to wait until it had a satellite fix in order to turn logging on. This was a much criticized shortcoming.

The update has to be applied in Windows XP or Vista. If you haven’t done so already you need to install the virtual COM port drivers first. The COM port auto-detection in the Holux utility didn’t work in my case so I had to go to the Windows Device Manager (-> Ports -> COM & LPT) to find out which virtual COM port had been assigned (in my case COM 5). Updating took about 30 seconds.

Don’t forget to go to the settings menu in the M-241 to turn “AutoLog” on.

Download the new firmware here:
http://www.holux.com/JCore/en/support/downloadCenter.jsp

• D700 firmware v1.02 introduces new GPS related options for Nikon GP-1 GPS receiver
  In the just released firmware version 1.02 for the D700, Nikon added an option to sync the GPS time to the camera time and a...
• How to use the Holux M-241 on the Mac over Bluetooth
  Today, my Holux M-241 GPS Logger was giving me a hard time. I wanted to connect it to my Macintosh over Bluetooth and the BT747...
• Holux M-241 GPS Logger field test
  We just returned from a two week holiday in Scotland. I hauled my complete photo gear (which added almost 10kg to my backpack…aww) with me...