Comments on: How to enable WPA2 in the Netopia 7347-84 VDSL router

By: xnick

xnick — Tue, 07 Dec 2010 15:14:39 +0000

HI,I have a netopia router 7247-03,tried many times of the default username and password,but fail,could you told me the 7000 series default username and password?
thanks!

By: NJ

NJ — Tue, 07 Sep 2010 11:49:53 +0000

You can find full details here:

http://broadband.motorola.com/.....okV782.pdf

Page 217

I am assuming this and all other config changes can be saved using TFTP and subsequently restored.

I hate the fact that Swisscom has control of the Wireless settings…..

Thinking of setting up separate VLANs and use one VLAN for guests which only gives them access to the internet via wireless and not to any of the wired-ports. Maybe other segmentation as well, will need to have look at this in more detail. This will take a while to setup and configure so I want to be able to back this up so I don’t have to go through this all again.

By: julien

julien — Thu, 02 Sep 2010 19:33:11 +0000

sorry the email was wrong – see this one –

By: julien

julien — Thu, 02 Sep 2010 19:32:38 +0000

How do I set up port forwarding – I am trying to set up a dyndns webserver – I have enabled IP Passthrou but its still not working – Please email me if you have a solution – or is the solution WPA2 ?

By: raaaabert

raaaabert — Sat, 24 Jul 2010 21:44:56 +0000

My Swisscom modem/wireless router has been intermitently dropping off my Win7 machine whilst the Xp machines keeps working. Last few times I’ve been toggling it on/off or restart via ethernet and the the web-interface. Tonight the same thing happened again (Win7 machine cant find the wireless SSID) even after hours of switching on/off and restarts.

I finally tried your workaround and PRESTO it works strait away! Thanks so very much.

BTW – I have no idea what Telnet is so I just downloaded Putty and logged in to the router via that – too easy.

By: Dominique Quatravaux

Dominique Quatravaux — Sat, 01 May 2010 09:53:53 +0000

With this change I finally got roaming in my home to work, thanks! I didn’t even think that the Netopia could have a telnet interface… Telnet is so 20th-century.

By: Jan

Jan — Thu, 24 Dec 2009 08:29:43 +0000

Hi, you can enable inbound 9999 connections in the NAT menu -> define custom service -> port forwarding. Please refer to the manual for details.

Cheers,
Jan

By: Maurizio

Maurizio — Thu, 24 Dec 2009 08:26:08 +0000

Hi,
you know how to enable the 9999 port on the netopia 7347-44 with telnet?
tks
Regards

By: Jan

Jan — Sat, 03 Oct 2009 20:45:47 +0000

Gianni, this is a weird but I didn’t test that myself. At least all the communication is properly secured when explicitly using WPA2 on the client, that was my main concern.

Cheers,
Jan

By: gianni

gianni — Sat, 03 Oct 2009 14:04:49 +0000

Hy. I done what you said. And it shown the same what you have on your screenshot above. But the problem is, i can connect me with wpa/tkip and Wpa2/Aes both of it. WTF? is that.

Thanks for your answer.

bye
gianni