ASUS P6T Hackintosh & OS X Mountain Lion
Posted July 7, 2012 
Comments(39)
Comments(39) I just finished installing OS X Mountain Lion (latest preview) on my new Intel 520 SSD. The 520 is one of the fastest consumer SSD’s on the market today. Even though my 3 year old ASUS P6T mainboard doesn’t support SATA-3, the 520 still performs ridiculously fast. It takes a mere 6 seconds from the Apple logo to the desktop. The spinning Apple circle doesn’t even show up.
Installation went pretty smoothly using Tonymacx86′s UniBeast and MultiBeast.
Will somebody please teach the guys in Redmond about how to speed up an operating system boot?
Can you give us an overview which kext Must be installed? I installed ml fresh. But it needs a Lot of Time to boot
Felix, please see this thread:
http://www.tonymacx86.com/moun.....870-a.html
Hi !
may you tell wich boot options you use for first boot after install ?
I don’t manage to boot after fakesmc + dsdt install (!?)
Thanks a lot !
janjac
Hello,
what p6t DSDT did you use?? or you used the easy install on multibeast ?
to janjac
did you try writting ,,PCIRootUID=0,, in chimera when starting to boot ?
Hi cmuchal
And thanks ;)
Actually i did my install again and this time it went good.
So certainly there was some “human error” in the options choice.
Anyway thanks for your reply :-)
C U
JJ
Hello,
Actually i’m runing ML hackintosh with Asus P6TSE and i have SSD OCZ Vertex3 and SSD OCZ Vertex2.
Vertex2 is writing to 30MB/S and reading to 90MB/S and Vertex3 writing 140MB/S and reading to 255/MBs…
I’ve trim enabled installed and theorically it show that it’s working but no lucky….
I had the same problem in Lion.
Thanks.
hi there!
im tryin to install hackintosh in my computer, btw im using:
p6t se
intel core i7 920
seagate barracuda 1tb
kingston 12gb ram 1333mhz
i bought mountain lion from appstore and made the usb booter with the tony’s guide with unibest.
i set up the AHCI with my sata and all looks fine.
i press F8 and the usb boots to the unibeast manu, i choose the USB and runs white screen with the apple logo, then appears the spining clock/apple and my screen conection goes lost. (i dunno how to xplain).
i tried with hdmi / vga but anyway it doesnt looks working.
any suggestion or help?
Thanks sooooo much!
Hi gsus
You may try to boot with the -v option to see whats happening in the verbose format
also you may add the option GraphicsEnabler=No
In case your video card is not natively ok
A+
JJ
i dont have sound after installing 10.8
i have asus p6t
Hi magic, try to read this post :
http://www.insanelymac.com/for.....w-leopard/
A+
Hi pocharlies, I’m having the same problem with both OS. I only have a Vertex 2 SSD but it doesn’t work as fast as it should. :S
Hi,
do you have a regular P6T? Not SE or Deluxe? If you have an older version, what installation options did you choose exactly? Because I am having a problem with OSX recovering from sleep, an over a minute delay on boot and also I can’t set the onboard soundcard (but I am using a Juli@ instead).
Thanks!
hi
I have a pure p6t ;)
(bios at last revision)
for audio I did this :
http://www.tonymacx86.com/audi.....rking.html
The dsdt from here & fleebailey are good
The sleep problem can have multiple sources (mine was a problem with video card)
On this post :
http://myhack.sojugarden.com/f.....2358#p2358
There is a dsdt with no hdef section and the section with gtx560ti video so you may paste there whats needed for your gpu
A+
JJ
Thanks JJ, will try this out!